|
: Product :
|
|
|
|
|
|
|
|
|
Pin Lock System - Pin Lock Systems - Pin Lock Manufacturers :
|
|
|
| |
Pin lock system is designed,
as a alternative, to a ball lock system for typical application. This system, facilitates use of only one hand to connect or disconnect & so can be effectively used where the connection points is in a closed or difficult to reach position. This system is also useful for flow of powder & slurry. In ball lock, solid particles can enter locking ball mechanism restricting the movement of balls making the connection & disconnection difficult. Pin lock system eliminates this possibility efficiently. A little care is required while connecting the plug so that there is no twist in the pipe. |
|
 |
 |
| |
This locking system is a available for all sizes of Through, Single Shut off Heavy Duty & Double Shut Off couplings. |
|
|
|
|
|
|
|
Slide Valve |
|
|
 |
| |
Slide Valve are used on fixed lines where frequent opening & closing are required. Flow starts & stops by just sliding the outer sleeve, so the operation is very fast. Slide valves require very less space than conventional valves which have hand wheels. Due to convenience in operation, slide valves prove to be very useful in pressure testing & pneumatic gauges. |
|
|
|
|
|
|
|
DOUBLE SHUT OFF COUPLINGS
|
|
| Size |
L |
DØ |
A/F |
T |
A |
| 26-S |
55 |
28 |
19 |
1/4"X19 |
13 |
| 29-S |
65 |
35 |
21 |
3/8"X19 |
14 |
| 212-S |
73 |
45 |
29 |
1/2"X14 |
17 |
| 219-S |
88 |
55 |
35 |
3/4"X14 |
15 |
| 225-S |
102 |
65 |
41 |
1"X11 |
20 |
| 230-S |
115 |
79 |
54 |
1-1/4"X11 |
24 |
| 238-S |
125 |
89 |
63 |
1-1/2"X11 |
25 |
| 250-S |
132 |
109 |
77 |
2"X11 |
27 |
|
 |
| Size |
L |
A/F |
T |
A |
| 26-P |
36 |
17 |
1/4"X19 |
13 |
| 29-P |
40 |
21 |
3/8"X19 |
13 |
| 212-P |
44 |
30 |
1/2"X14 |
15 |
| 219-P |
52 |
35 |
3/4"X14 |
17 |
| 225-P |
62 |
42 |
1"X11 |
20 |
| 230-P |
70 |
54 |
1-1/4"X11 |
24 |
| 238-p |
75 |
63 |
1-1/2"X11 |
24 |
| 250-P |
80 |
77 |
2"X11 |
27 |
|
These couplings have automatic shut off valve at both ends; in socket & plug also. So on disconnection, both socket & plug are sealed instantly. This type is widely used on Hydraulic lines carrying oils, water, chemicals & petroleum products. Material & seal are selected to suit the type of fluid.
Construction :
Valve - Automatic shut off valve in both, sockets & plug.
End connection - F - Female screw.
Seal - Nitrile, Viton & Teflon area available on request.
Lock System - Ball lock or pin lock.
Standard Material - Steel, Stainless Steel, Brass, Carbon Steel
Application - Chemical plants, Refineries, Ships.
|
|
|
DOUBLE SHUT OFF ( VACUUM )
These couplings have same external configuration as Double Shut Off Couplings, but internal automatic valve mechanism is designed for ultra tight closing to withstand high vacuum. They are recommended for use in vacuum evacuation, Ferron charging & Refrigerating machine oil.
Construction - Same as Double Shut Off valve.
Material - Brass.
Seal - Neoprene for Ferron R-11,12,22.
Refrigerating machine oil.
Viton for Ferron R-11,12.
Refrigeration machine oil.
Size - 1/4",3/8",1/2",3/4" only. |
 |
|
|
|
| |
DOUBLE SHUT OFF ( HIGH PRESSURE )
These couplings are designed for High Pressure applications. As there is no air gap
between plug & socket when connected, there is no chance of any air entering hydraulic
lines, so air bleeding is unnecessary. Fluid leakage at the time of connection or
disconnection is nil because it flows through the holes at the centre of the valve body. Designed to provide one touch connection. Seal - Nitrile. Application - High Pressure Hydraulic equipments & testing equipment. For hydraulic circuits having large pressure changes. |
| |
 |
|
|
|
|
|
|
SOFT JAWS
Quick Change Tip Jaws for C. N. C. Power Chuck.
|
|
|
| Advantages
• Save 10
to 15 minutes per setting due to quick change tips
• Supplied with Easy Identification Box, thus saving time
in finding right jaws set
• Cost of tip set is about 1/3 of soft jaw set 3
• Less inventory carrying cost as same tips can be
• used on different models of chucks of the same
size
• Requires very Less Storage Space
Features
:
• Full
Range for 0. D. Clamping 0-10 mm, 10-20 mm, 20-40 mm
etc.
• Hardenable tips are available
• Hexagonal bar clamping is possible, with hardened flat
tips.
Typical
size for Base Jaws (Actual size may very to Suit your
chuck)
|
Typical size for base
Jaws,(Actual size may very to suit your chuck) |
 |
Chuck
Size |
165 |
200 |
250 |
315 |
|
Width |
35 |
35 |
45 |
50 |
|
Height |
35 |
35 |
45 |
50 |
| Dovetail width |
19 |
19 |
28 |
33 |
| Length, Serrations, Slot, Drill & C. D. to
suite your Chuck |
Tips
(For M. D & S. D)
Tips. (En.)
 |
Chuck
Size |
165 |
200 |
250 |
315 |
 |
Chuck Size |
165 |
200 |
250 |
315 |
| Width |
22 |
22 |
32 |
35 |
Width |
35 |
35 |
45 |
50 |
|
Length |
32 |
42 |
42 |
47 |
Length |
32 |
32 |
42 |
47 |
| Thickness |
32 |
32 |
42 |
45 |
Thickness |
32 |
32 |
42 |
45 |
|
|
|
|
|
|
|
|
|
|
